Job Description

Position Title: Summer Intern - Engineer (Electrical, Instrument, & Control Systems) (Summer 2025)

OPEN UNTIL FILLED

Department/Location: Maintenance/Beulah, ND

Company: Dakota Gasification Company

Position Purpose:

This temporary position provides technical assistance on electrical, instrumentation, and control equipment to reduce production losses from equipment failures, and to ensure safe and compliant operations of the plant. This is accomplished by assisting engineering with equipment design, application, and troubleshooting as well as managing and interfacing with Maintenance regarding preventive maintenance (PM) and predictive maintenance (PdM) techniques.

Essential Functions:

• Under close supervision, develop scopes of work, preliminary and final electrical engineering research, design, and engineering packages, cost estimates, specifications, engineering and construction schedules, and project justifications.

• Follow plant, industrial, and regulatory standards to assess feasibility, estimate, design, test, schedule, and implement electrical, instrument, and control system projects to enable plant operations personnel to achieve optimum plant production.

• Become familiar with the application of the National Electric Code and other appropriate standards.

• Assist in specifying new equipment and maintaining equipment and component standardization.

• Ensure equipment spare parts are optimized on critical equipment by reviewing min/max inventory levels, determining recommended suppliers and facilitating equipment BOM revisions.

• Produce as-built documentation of electrical, instrument, and control systems.

• Provide technical support to Process Operations, Planning, and Maintenance in equipment repairs, replacements, substitutions, and upgrades.

• Attend all scheduled safety, training, and department meetings as required; also occasionally conducts safety meetings.

• Assist with other company functions, such as DGC Family Night.

Qualifications:

• Enrolled as a full-time student in a four-year Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET) accredited Electrical Engineering program; or

• Recently completed a four-year Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET) accredited Electrical Engineering program.

• At least 18 years of age.

• A minimum of 2.5 grade point average (GPA) is preferred.

• Proficient with Microsoft Word, Outlook, and Excel.

• A valid driver’s license.

• Resume and unofficial transcript required.

• The above statements are intended to describe the general nature and level of work being performed in this job. This description is not intended to be an all-inclusive list of responsibilities, duties, and requirements for personnel in this position. The incumbent is responsible for performing all duties in a safe and efficient manner in compliance with safe work procedures and safety regulations. Prompt and regular attendance is a requirement for this position.

Typical Physical/Mental/Environmental Demands:

Requires constant hand coordination; frequent sitting, standing, walking, use of computer/keyboard, and climbing stairs and ladders; occasional bending, low level and elevated activity, lifting and carrying up to 50 pounds, hand grip up to 25 pounds, reaching above and below shoulder level, crawling, use of tools and foot controls and turning of valves. Requires finger dexterity, ability to perform close work, binocular vision, color vision, hearing, and the ability to speak. Requires the ability to analyze data, conduct research, implement recommendations, develop plans and goals, present information to others and work under pressure of time constraints. Over 50 percent of the day is spent in an office environment. Exposed occasionally to dirt, dust, chemicals, extreme heat and cold, vibration, noise, poor ventilation, electrical risks, confined areas, and working at heights up to 150 feet, which requires the use of safety equipment, including a harness, in accordance with ANSI Z359 standards. Incumbents are required to wear dusk masks, respirators, and full face Scott Air Paks when necessary. Travel is required to meet with vendors and for training. The ability to operate a vehicle on and offsite is required.

Wage : $26 per hour

Applicants interested in this opening should go to https: //www.dakotagas.com to apply. Employees must apply through Inside Basin, by clicking on a position and signing into the Infor Application.

Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.

Position Student Intern – Engineering (Electrical, Instrument, & Control Systems) (Summer 2025)

Category Student Intern

Employment Type Temporary

Location US:ND:BEULAH

Req ID 1936