*SUMMARY OF FUNCTIONS *

• Perform troubleshooting, basic welding, electrical repairs, lubricate machinery, change parts, or perform other machinery maintenance. 

*ESSENTIAL DUTIES AND RESPONSIBILITIES *

• Perform preventive maintenance as scheduled. 
• Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.  
• Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.  
• Inspect or test damaged machine parts and mark defective areas or advise supervisors of repair needs.  
• Install, replace, or change machine parts and attachments, according to production specifications.  
• Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures.  
• Participate in the action planning process. 
• Track/record time and all repair parts using work orders & maintenance management system.
• Determine if a part is repairable and pass it on to the maintenance analyst to get repaired. 
• Reassemble machines after the completion of repair or maintenance work.  
• Start machines and observe mechanical operations to determine efficiency and to detect problems. 
• Install equipment, machines, wiring, or programs to meet specifications. 
• Collaborate with other workers to repair or move machines, machine parts, or equipment. 
• Follows basic blueprints, specifications, or verbal instructions and plans the intended location of wiring and equipment. 
• Measure, cut, assemble and install electrical wiring, stripping, splicing, and soldering as necessary. 
• Attaches cables and wiring to the incoming electrical service and to various fixtures and machines that use electricity. 
• Perform basic adjustments and replace defective or improperly functioning circuitry and electronics components. 
• Set up, operate, and tend welding machines that join or bond components to fabricate metal products or assemblies. 
• All other duties assigned by supervisor. 
• Clean workstation and surrounding areas making sure it is clean and free of debris.  

*SKILLS AND QUALIFICATIONS  *

• Prefer high school diploma/GED 

• 2 Years maintenance experience 

• Understand and follow oral or written instructions issued by supervisors 

• Ability to exert muscle force repeatedly or continuously over time 

• Ability to bend, stretch, twist, or reach with body, arms, and/or legs 

• Ability to troubleshoot equipment malfunctions to determine causes of operating errors and deciding what to do about it

• Ability to watch gauges, dials, or other indicators to ensure a machine is working properly 

• Ability to work well as part of a team 

• Ability to complete production tallies, downtime tallies, and daily reports as required 

• Possess excellent reasoning and mathematical skills 

• Possess knowledge of machines and tools, including their designs, uses, repair, and maintenance 

• Ability to communicate effectively to all levels within the organization 

• SAFETY{target="_blank" rel="noopener"}* *

  · 

  Follow all area/machine center specific safety regulations 

  · 

  Wear all required personal protective equipment: hardhat, safety glasses, hearing protection, etc...as required 

  · 

  Do not enter restricted areas 

  · 

  Report immediately to supervisor any equipment that is unsafe or functioning improperly 

  · 

  Request assistance when a task exceeds individual knowledge 

  · 

  Visually inspect equipment and area before starting/operating 

  · 

  Whenever possible, eliminate unsafe conditions as soon as possible 

  · 

  Use Standard Lockout Procedures when appropriate for machine centers 

  · 

  Use proper lifting technique by pushing, pulling and lifting with your legs and not your back 

  · 

  Never approach a saw while it is still running 

  · 

  Follow all other safety regulations as set forth by the company