USNLX Diversity Jobs

USNLX Diversity Careers

Job Information

HOTTMANN CONSTRUCTION Concrete Laborer in DANE, Wisconsin

JOB REQUIREMENTS: Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. May assist other craft workers. Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints. Apply weather-stripping to reduce energy loss. Clean or prepare construction sites to eliminate possible hazards. Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface. Check the forms that hold the concrete to see that they are properly constructed. Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools. Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven. Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it. Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish. Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine. Mold expansion joints and edges, using edging tools, jointers, and straightedge. Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process. Operate power vibrator to compact concrete. Polish surface, using polishing or surfacing machine. Produce rough concrete surface, using broom. Push roller over surface to embed chips in surface. Set the forms that hold concrete to the desired pitch and depth, and align them. Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float. Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish. ***** OTHER EXPERIENCE AND QUALIFICATIONS: No experience needed - we will train ***** APPLICATION INSTRUCTIONS: Apply Online: hottmannconstruction.com E-Mail a Rsum: jody@hottmannconstruction.com

DirectEmployers