SUMMARY

Assess and remove burrs, sharp edges, and excess material from manufactured components as required to

meet part and / or customer specifications.

ESSENTIAL DUTIES/RESPONSIBILITIES

Remove burrs or excess metal from machined parts using various hand tools and pneumatic grinders.

Hand form part geometry as required by drawing, sketch, or instruction.

Hand tap threaded holes as required to meet specifications.

Load and unload materials, parts, or products onto or from pallets, skids, conveyors, or trucks.

Clean work areas.

Polish / lap machined parts as required.

Hand blend machined parts as required.

Ensure that parts are handled and moved and packaged with the appropriate care required for space-based

products.

Ensure work area is clean and free of hazards such as dust, oil, and general debris.

Work with fellow employees and Engineers as required to meet product requirements.

Temporary assignment to various Atec facilities may be required as needed to support Atec operations.

Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work

environment.

Ensure activities are conducted in accordance with Atec International Standards Organization

(AS9100/ISO) policies and correct and report any deviations to appropriate area manager/supervisor.

SUPERVISORY RESPONSIBILITIES

N/A

AS9100/ISO SPECIFIC DUTIES

Be familiar with and understand Atec Quality Policy and company objectives.

Understand required AS9100/ISO specific Procedures and Work Instructions.

Complete all records required by Procedures and Work Instructions.

Participate in Atec Continuous Improvement activities as appropriate.

Participate in AS9100/ISO training as required.

Cooperate with Auditors.

Report any deviations to appropriate area manager/supervisor.

EDUCATION AND/OR EXPERIENCE

High school diploma or General Education Degree (GED); or one (1) to five (5) years related experience

and/or training; or combination of education and experience.

Must have knowledge of fundamental mathematics.

Must have the ability to understand drawing requirements and applied tolerances.

Must have a working knowledge of measurement tools including but not limited to: calipers, radius gages,

angle gages, surface gages, etc.

Must demonstrate extreme accuracy and control when performing advanced deburr operations.

Must display a very high level of attention to detail on complex parts.

Must have general knowledge of coatings and plating and how to avoid damaging them.

Must understand proper masking techniques as required.

CERTIFICATES, LICENSES, REGISTRATIONS

N/A

PHYSICAL DEMANDS

Employee is regularly required to stand, walk, sit; use hands to handle or feel; and reach with hands and

arms, climb or balance, stoop, or crouch.

Employee must regularly lift and/or move up to 50 pounds.

Good eyesight, by lenses if necessary.

WORK ENVIRONMENT

Employee is regularly exposed to moving mechanical parts.

Noise level in the work environment is usually loud.

Extended work hours and/or travel may occasionally be required.