Must be certified by the Mississippi DEQ and Alabama DEQ to work with lead (Pb)-based paints.

Follow all safety and occupational rules and regulations regarding lead-based paint.

Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives. Related occupations Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting. Related occupations Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines. Related occupations Read work orders or receive instructions from supervisors or homeowners to determine work requirements. Related occupations Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats. Related occupations Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers. Related occupations Erect scaffolding or swing gates, or set up ladders, to work above ground level. Related occupations Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies. Related occupations Calculate amounts of required materials and estimate costs, based on surface measurements or work orders. Related occupations Polish final coats to specified finishes. Related occupations Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly. Related occupations Select and purchase tools or finishes for surfaces to be covered, considering durability, ease of handling, methods of application, and customers' wishes. Related occupations Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting. Related occupations Remove fixtures such as pictures, door knobs, lamps, or electric switch covers prior to painting. Related occupations Use special finishing techniques such as sponging, ragging, layering, or faux finishing. Related occupations Cut stencils and brush or spray lettering or decorations on surfaces. Related occupations Waterproof buildings, using waterproofers or caulking. Related occupations Spray or brush hot plastics or pitch onto surfaces. Related occupations Bake finishes on painted or enameled articles, using baking ovens.